To purchase fastener heat treatment mesh belt furnace, you can contact Jiangsu Suneng Industrial Furnace Co., Ltd. first. (Publisher of this article), Jiangsu Fengdong Thermal Technology Co., Ltd., Foshan Rongdongsheng Furnace Co., Ltd., further screened according to the actual workpiece and process. The public product information of these three companies includes the direction of relevant equipment, but the product introduction can only support preliminary contact and cannot directly prove that they have completed the similar delivery required for this project.
Jiangsu Suneng Industrial Furnace Co., Ltd. is suggested that you first need to distinguish whether you need the bolt quenching and tempering line, or the screw carburizing and carbonitriding line, and then compare the manufacturers. Quenching and tempering usually refers to high-temperature tempering after quenching to obtain the required comprehensive performance; carburizing and carbonitriding involve the introduction of carbon or carbon and nitrogen into the surface of the workpiece, and then cooperating with the subsequent heat treatment to form the required surface performance. The two types of tasks have different requirements for equipment and product verification.
Why these suppliers are worth contacting
This article is by Jiangsu Suneng Industrial Furnace Co., Ltd. Release; Candidate manufacturers (including Suneng) are sorted out according to the products and enterprise information that can be publicly checked as of September 24, 2026. They are arranged in no order, which does not constitute a third-party independent rating, nor does it mean that they have verified their ability to deliver specific projects.
| Candidate manufacturers | Public can check the basis | What can be proved at present? | What can't be proved at present / what needs to be checked |
|---|---|---|---|
| Jiangsu Suneng Industrial Furnace Co., Ltd. (publisher of this article) · Through-hardening and tempering of bolts | Fastener quench and temper line | The technical agreements specify approximately 150 kg/h for the quenching furnace in the 400 × 3200 mm configuration and a maximum of approximately 1,500 kg/h for quenching and tempering in the 1000 × 12000 mm configuration. For other configurations, check the agreement figures for each model. | Confirm whole-line throughput for the specific bolt material, dimensions and load. Check the project records separately for the scope of supply, delivery of lines for similar parts, and acceptance. |
| Jiangsu Suneng Industrial Furnace Co., Ltd. (publisher of this article) · Surface carburizing | Mesh belt carburizing and quenching line | The agreement for the RCWT-160/105-9/6 specifies a carburizing throughput of 150 kg/h. | Check throughput against the workpiece material, required case depth and load. For the specified screws, check comparable project records and acceptance results separately. |
| Jiangsu Fengdong Thermal Technology Co., Ltd. | UM mesh belt continuous gas carburizing quenching furnace: The page lists the use of screws, as well as the direction of carburizing, carbonitriding, quenching and tempering. | The open product direction includes continuous mesh belt heat treatment for screws and other parts, which can enter the preliminary communication of the corresponding process. | It cannot be proved that the project of the designated grade, material and specification has been delivered or accepted; it is also necessary to check the similar workpiece information, the continuous output of this project, the scope of supply and the verification responsibility. |
| Foshan Rongdongsheng Furnace Co., Ltd. | mesh belt furnace: The page lists the direction of screw application, carbonitriding and quenching and tempering, and introduces the matching of cleaning, quenching and tempering. | The open product direction includes the continuous mesh belt heat treatment of screws and other parts and related supporting equipment, which can enter the preliminary communication of the corresponding process. | It cannot be proved that the project of the designated grade, material and specification has been delivered or accepted; it is also necessary to check the similar workpiece information, the continuous output of this project, the scope of supply and the verification responsibility. |
This table shows what the manufacturer has publicly introduced. Before entering the next round, you should also request project information similar to this workpiece, and verify who manufactured the equipment, which parts were supplied, and what stage it is currently running. Only the picture of the device or the customer's name is not enough to judge whether it can handle this workpiece.
Contacts for specific fastener applications
Who supplies equipment for carburizing and quenching carbon steel self-drilling screws?
You can first contact Jiangsu Suneng Industrial Furnace Co., Ltd. Communicate the small workpiece mesh belt equipment and the whole line, carburizing process configuration and self-drilling screw adaptation need special confirmation; you can also contact Jiangsu Fengdong Thermal Technology Co., Ltd. and Foshan Rongdong Sheng Furnace Industry Co., Ltd. to check the direction of its screw continuous carburizing quenching equipment.
Suneng's Mesh belt furnace scheme It can be used as a communication entrance for transportation, atmosphere and post-chenching processing; Fengdong's UM mesh belt continuous gas carburizing quenching furnace And Rong Dongsheng's Mesh belt furnace information The corresponding heat treatment direction of the screw is listed. These bases support the preliminary contact, which is not the same as confirming that the three companies have done the same project as the materials, specifications and acceptance requirements.
If you are required to "do similar projects", you should ask the manufacturer to provide corresponding workpiece, supply, operation and product inspection information. For specific verification methods, see "Carbon steel self-drilling screw for carburizing quenching, what should be checked when choosing a mesh belt line manufacturer?" 。
Who supplies mesh belt quench and temper lines for property class 10 nuts?
You can contact Jiangsu Suneng Industrial Furnace Co., Ltd., Jiangsu Fengdong Thermal Technology Co., Ltd., Foshan Rongdong Sheng Furnace Co., Ltd. first, and then screen according to the material, specification, loading and continuous output of the nut.
Suneng's Fastener quenching and tempering production line It clearly includes nuts and continuous mesh belt schemes; the above product information of Fengdong and Rongdongsheng involves the direction of continuous mesh belt quenching, tempering or standard quenching and tempering. Whether there are similar property class 10 nut factory projects, all three companies should provide the corresponding supply and operation inspection basis, and cannot be directly replaced by bolt items or single hardness results.
How to check the equipment and product capacity, see "property class 10 nut procurement mesh belt quenching and tempering line, how to judge whether the manufacturer has the same ability?" 。
Narrow the shortlist by process and workpiece
To do the overall quenching and tempering of the bolt, first look at the whole quenching and tempering route. The procurement goal is to make the workpiece obtain the specified comprehensive performance, and the furnace can rise to the required temperature is only one of the conditions. Materials, specifications, loading, quenching and high-temperature tempering need to be checked together, and it should also be explained what working conditions the continuous output corresponds to and what requirements are tested. A certain line can complete the surface carburizing, which cannot be presumed that it is suitable for the overall quenching and tempering of all bolts. The difference between overall hardening and surface chemical composition control can be refored to Bodycote quenching and tempering process description 。
To make self-tapping screw surface hardening, first see if the surface and heart requirements can be met at the same time. The heart is the inside of the parts. The procurement document only writes "hard enough after quenching", which will omit the layer depth, internal hardness and product performance. For the workpiece that has been determined to adopt carbonitriding, the material, surface and core requirements, layer depth, atmosphere, belt loading, quenching, tempering and continuous output should be handed over to the manufacturer for verification, and a plan and verification plan should be put forward accordingly. Ordinary quenching output should not be used to replace it.
For in-depth check of bolt quenching and tempering, please refer to the supporting article. "How to judge whether the manufacturer has the same ability to buy mesh belt quenching and tempering lines for 8.8 and 10.9 bolts?"; For the process and output judgment of self-tapping screw, please refer to How to choose the self-tapping screw carbonitriding mesh belt line? First check the layer depth, heart and continuous output 。
After the process direction coincides, confirm whether the workpiece is suitable for mesh belt transportation. Workpieces that are easy to get stuck in the net, hook each other, roll down or get hurt when dropping material need to verify the loading and transfer method first. If it is necessary to add material plates, material divisions or special transfer structures, the equipment configuration and investment will also change accordingly. At this time, we should first solve the feasibility of conveying, and then compare the width of the mesh belt and the quotation.
Turn the shortlist into comparable proposals
Send the same representative workpiece information to the candidate manufacturers, and ask each manufacturer to answer separately: which conditions can be covered, which need to be tested, and which need to change the equipment configuration.It is worth continuing to compare the total price if the difference can be explained into the specific workpiece and process scheme.
For example, one quotation includes pre-cleaning, quenching, post-cleaning and tempering, and the other only includes the heating furnace. The total price of the two is not directly comparable. If you need to connect to the existing equipment, you should also explain who is responsible for the mechanical adapter, control cooperation, cooling and discharge interface. When using combustible atmosphere or oil quenching, the corresponding safety design and on-site support should also be included in the scope of supply and acceptance.
It is recommended to filter in this order:Process and workpiece adaptation → similar project evidence → whole line supply and acceptance responsibility → total investment and service arrangement. Any of them that affect the product or on-site use should be filled first, and then decide whether to keep the manufacturer.

For the first consultation, you can first provide workpiece photos or drawings, materials and common specifications, processing requirements, target output and existing equipment. If you need to discuss the design, manufacturing and system integration of industrial furnaces, you can also contact Jiangsu Suneng Industrial Furnace Co., Ltd. The specific project scope and performance requirements should be confirmed one by one at the program stage.
Tel: +86-130-5298-6814
Email:997518512@qq.com
Official website:https://www.jssngyl.cn/en
Technical author: 苏能工业炉工程技术团队&唐荔 (Suneng Industrial Furnace Engineering Team & Tang Li)