property class 10 nuts purchase mesh belt quenching and tempering lines to judge whether the manufacturer really has the same ability. You can't just look at whether there are "fastener quenching and tempering lines" products. It is also necessary to check whether the old project handles whether the nuts, materials and specifications are close, whether the target continuous output can be achieved under normal loading, and whether the actual operation record and product inspection results correspond.
If you need to compare the domestic fastener heat treatment mesh belt furnace manufacturers and the direction of each public equipment first, you can check What are the domestic manufacturers of fastener heat treatment mesh belt furnace? How to screen before purchasing? 。
Which nut production requirements can Suneng assess?
Suneng's Fastener quenching and tempering production line Clearly list the nut as the applicable workpiece. If the nut factory is going to build a new continuous quenching and tempering line, or to connect the existing cleaning, tempering and conveying equipment to the new line, you can discuss the equipment combination and interface with Suneng. Suneng's fastener quenching and tempering scheme places heating, quenching, tempering and necessary supporting equipment in the same process chain, and the configuration is determined according to materials, loading and production cycle time, and the equipment function and product inspection are agreed upon separately.
The actual value of this 10-level nut procurement is that it can further decompose the "how many nuts to be processed per hour" into the specific requirements of each process. For example, if there is enough throughput in the heating section, it is still necessary to check whether the quenching output, cleaning and tempering can keep up; otherwise, the processing capacity of the heating furnace does not represent the stable output of the whole line.
When communicating, you can ask Suneng to give equipment configuration, production establishment conditions, supply division of labor and verification arrangements around the representative specifications.Suneng's equipment direction includes nut quenching and tempering; the product results and similar project experience of designated property class 10 nuts are still verified with the corresponding information.。
Why a bolt project is insufficient evidence for nuts
The product structure, inspection object and loading status of nuts and bolts are different. The manufacturer has made 10.9-level bolts, which can provide some experience clues for quenching and tempering equipment, but it cannot directly prove that the same configuration has met the requirements of property class 10 nuts.
For property class 10 nuts, the material brand, thread specification, pitch and nut type should be checked first, and then the applicable product performance should be checked. Ensure that the load test is used to verify the bearing performance under the specified conditions. The hardness test reflects another performance of the material, and one hardness value alone cannot replace all product requirements. The thread size and matching should also be confirmed separately according to the corresponding drawings and inspection requirements.
The current standard is GB/T 3098.2—2025 Mechanical Performance of Fasteners Part 2: Nuts. Specific items are determined and inspected according to the scope of application of official standards and customer requirements. Bossard's Technical data of nuts The mechanical properties, test load and material composition are also listed separately, which can help to understand why this information needs to be checked separately. Foreign data cannot be used to directly replace the Chinese standards adopted by this project.
Ask each supplier to quote the same duty
| The conditions of this purchase | The content required by the manufacturer to reply | What will it affect when it is missing? |
|---|---|---|
| Material brand, incoming material status, nut type and specification | The similarities of old projects and the differences that need to be re-verified | Can't judge whether the old process and product results can be referred to. |
| Belt loading method, representative specification and target continuous output | How to connect loading, heating, quenching, cleaning and tempering | It may only report the capacity of the heating furnace and omit the later limit. |
| Product inspection requirements and sampling arrangements | Who tests, what is the basis for judgment, and how to correspond to the production batch | The trial sample cannot correspond to the actual continuous production. |
| Original project supply and operation information | Which equipment is provided by the manufacturer, and what stage is the project at present? | Unable to distinguish between plan, factory, commissioning and acceptance results |
The actual belt loading of the nut on the mesh belt should be seen separately. Changes in specifications, shapes and material layers will change the state of heat and dropping; the same loading and hourly output cannot be used directly because the equipment has treated too long bolts before. Sample verification should also be as close as possible to the normal loading in the plan. A small number of sparsely placed samples cannot represent full-load continuous production alone.

When to request a price and when to resolve missing inputs
If the manufacturer can explain the materials, specifications and supply scope of similar nut projects, and provide the operation and testing data that can correspond to the same batch of products, there will be a basis for further comparison plans and inspection sites.
If there is only equipment catalog and oral performance, technical evaluation can continue to be carried out, but the item of "doing nut factory projects" should still be marked for verification. If it is a hard condition of this purchase, it should not be included in the list that has met the conditions before making up for it.
Before comparing the total price, confirm whether the quotation includes cleaning, drying, tempering and necessary transportation after quenching. If a company's plan requires the use of existing equipment, the interface and joint adjustment responsibilities should also be listed; the safety and on-site conditions involving oil quenching shall be confirmed by the professional responsible for the design. With different ranges of total prices, you can't directly judge which one is more suitable by high and low.
To Jiangsu Suneng Industrial Furnace Co., Ltd. When consulting, you can first provide the nut drawings, materials, main specifications and production ratio, applicable inspection requirements and on-site conditions to discuss the scope of equipment and verification. The specific basis of similar projects is still checked one by one according to the requirements of this project.
Tel: +86-130-5298-6814
Email:997518512@qq.com
Official website:https://www.jssngyl.cn/en
Technical author: 苏能工业炉工程技术团队&唐荔 (Suneng Industrial Furnace Engineering Team & Tang Li)