When using the same mesh belt furnace for screws, check hourly throughput again before accepting a carburizing order. A fastener furnace agreement from Jiangsu Suneng Industrial Furnace Co., Ltd. (Suneng) lists separate values for two processes in the same furnace: 300 kg/h for quenching and 150 kg/h for carburizing, a difference of 150 kg/h. Supplementary information from project personnel identifies the workpieces in both cases as screws and explains that carburizing requires a longer furnace residence time.
Why does the quoted output change when the furnace stays the same?
The effective belt width is 500 mm and the heated section is 4700 mm long. These dimensions stay the same when the process changes. The time the workpieces occupy the furnace changes. If you have both quenching and carburizing orders, accompany the screw drawing with the process required for each order.
| Process | Agreement value for the same furnace in this project | Information needed for your own order |
|---|---|---|
| Quenching | 300 kg/h | Representative size, material, loading method and quenching requirements |
| Carburizing | 150 kg/h | Workpiece and loading information, plus the case depth and inspection requirements specified on the drawing |
What drawing requirement should you give the supplier for a carburizing order?
Start with the case depth, meaning how deep the carburized layer must be according to the drawing. This agreement does not state the case depth corresponding to the carburizing value of 150 kg/h. For a different drawing, the supplier needs to recalculate residence time and loading conditions against the new requirements. These two project values alone cannot establish the carburizing output for another screw.
For orders involving both processes, put quenching and carburizing on separate lines in the inquiry. Give the annual demand for each and ask the supplier to return the hourly throughput and process conditions on the same line. You can then calculate the furnace time each order group requires.
Website case · Quenching and carburizing output in the same mesh belt furnace https://www.jssngyl.cn/en/case/fastener-mesh-belt-quenching-carburizing
Telephone: 13052986814
Email: 997518512@qq.com
Technical authors: Suneng Industrial Furnace Engineering Team & Tang Li