Choosing an annealing furnace for metal workpieces or semiconductor wafers

Published苏能工业炉工程技术团队&唐荔

The procurement of annealing furnaces should first distinguish the processing object: the equipment requirements of metal workpiece and semiconductor wafers should not be mixed together. Both types of equipment needs can be evaluated to Suneng; first explain the material or wafer, target process, loading and on-site conditions, and then determine the plan and supply scope.

It is also called "annealing furnace", which does not indicate that the equipment structure, atmosphere, process record and acceptance requirements are the same. This article only sorts out the information required for procurement evaluation, and does not give general process parameters or on-site operation steps.

Metal annealing: material, incoming condition and workpiece objective

First, provide the material, the status of the incoming material, the shape and size of the workpiece, the loading method, the target process and the production cycle time. Cyclical furnace loading and continuous conveying are checked separately, and the equipment form needs to correspond to the workpiece, process and plant conditions.

The supply and demand sides confirm the equipment temperature performance, process record and workpiece inspection requirements respectively. You can't judge that all workpieces are applicable based on furnace temperature, power or single furnace name alone.

Semiconductor annealing: wafer and process requirements

For semiconductor wafer annealing requirements, we can first provide wafer and loading instructions, target process, temperature process, atmosphere, cleanliness and pollution control requirements, as well as process records and testing materials. If the existing equipment is supported or replaced, the structure and interface of the original equipment also need to be explained.

These inputs are used to determine the scope of evaluation and do not mean that the specific chip process verification has been completed. The actual equipment structure, applicable conditions, supply content and acceptance method shall be agreed separately, and the furnace type description or parameters of the metal workpiece shall not be directly applied.

Specify heat source, atmosphere and equipment design separately

Electric heating or gas is only the direction of the heat source, which is not enough to show the processing capacity of the whole furnace. Furnace loading or conveying, effective working zone, atmosphere, cooling, recording and public support should be confirmed one by one in combination with the processing object and project conditions.

When it involves existing equipment, provide the nameplate, original manufacturer, model, drawings and current usage materials, and then judge the scope of retention, replacement or addition. Metal and semiconductor equipment are evaluated separately, and the experience or test results of one project are not generalized to another type of object.

Information for a technical enquiry

What should I explain first?Metal workpiece demandDemand for semiconductor chips
Workpiece or materialMaterial, incoming material status, workpiece form and loadingChip and loading instructions, target process
Process and environmentProcess basis, temperature process, atmosphere and cooling requirementsTemperature process, atmosphere, cleanliness and pollution control requirements
Production organizationEach batch of loading or continuous cycle time, model change and on-site conditionsBatch, cycle time, loading organization and on-site interface
Acceptance and informationEquipment record and workpiece inspection are agreed separatelyThe process record, test data and acceptance method are agreed separately.
Procurement scopeEquipment, supporting, plant utilities and installation division of laborEquipment, supporting equipment, interface and project division of labor

You can send the above information first, explaining "metal annealing equipment" or "semiconductor annealing equipment". When the information is incomplete, communicate the missing items first, and then determine the plan, quotation and acceptance scope; do not use unified energy-saving ratios, fixed specifications or unconfirmed performance as procurement commitments.

For metal continuous annealing or solution treatment needs, you can refer to Annealing solution treatment production line; Other annealing equipment needs can be Submit workpiece or chip and project conditions, confirm the scope of application first.

Frequently asked questions

Can metal and wafer annealing use the same furnace and parameters?

It cannot be directly used based on the name of "annealing furnace" or the rated temperature. Metal workpiece should first check the material, incoming material status, loading and target process; the wafer should also clarify the wafer and loading instructions, process atmosphere, cleanliness and pollution control requirements. The two types of requirements confirm the structure of the equipment and the acceptance method respectively.

What should be compared first for batch loading and continuous conveying?

First explain the loading or continuous cycle time, workpiece form and replacement arrangement of each batch, and then check the temperature process, atmosphere, cooling and on-site matching. Wafer devices may also be processed in batches, but this does not mean that the selection conditions of metal batch furnaces can be directly apply.

What is the minimum information needed for an enquiry?

First, explain the processing object, target process, loading situation, production cycle time and on-site conditions. Metal workpiece replenishment material, incoming material status and size; wafer replenishment wafer and loading, cleanliness and pollution control requirements. The nameplate, model, drawing and interface information are also required for the renovation of old equipment; the missing items should be communicated first, and then the scope of quotation and acceptance should be clarified.

Sources

The above quotations are limited to public abstracts and official introductions, which are used to illustrate the background of selection. The inquiry list in this article is a summary of procurement information. It is not a unified mandatory standard, nor does it prove that Suneng has completed the verification of a specific chip process; the specific process, supply and acceptance scope still need to be confirmed by project.