Heat treatment for automotive fasteners
CQI-9 Assessment: What Equipment Support Can a Suneng Mesh-Belt Quench-and-Temper Line Provide?
When purchasing a mesh-belt quench-and-temper line for automotive fasteners, review the equipment configuration, operating records and the buyer’s assessment preparations together. A Suneng technical agreement for a fastener project specifies zoned temperature control, temperature-record retrieval and output, furnace atmosphere control, alarms, quench-tank monitoring, and operating documentation and training. The agreed scope provides a practical basis for discussing equipment and responsibilities before purchase.
Suneng equipment (as agreed for this project)
- Zoned temperature control
- How the hardening and tempering furnaces are controlled
- Temperature records
- What can be stored, retrieved and output
- Furnace atmosphere control
- Which sensing and control devices are included
- Alarms
- Which abnormal conditions are signalled
- Quench-tank monitoring
- Temperature, agitation and liquid level
- Documentation and training
- What is delivered with the equipment
Separate equipment delivery from the buyer’s responsibilities
CQI-9 addresses heat-treatment processes and their management in the automotive industry. The organization performing heat treatment assesses its own operations.[1] Equipment functions, production records and assessment preparations need to work together; purchasing equipment alone does not demonstrate that an assessment has been completed.
Equipment deliverables and the buyer’s responsibilities
The example below is based on a technical agreement between Suneng and a fastener manufacturer. The equipment column describes this project’s agreed configuration and deliverables, not a standard specification for every line. Other projects are governed by their own technical agreements. The first and third columns help define responsibilities before purchase; they are not a complete CQI-9 requirements checklist.
| What to check before assessment | Suneng equipment (as agreed for this project) | What the buyer performing heat treatment needs to arrange |
|---|---|---|
| Zoned temperature controlHow the hardening and tempering furnaces are controlled | This project’s agreement specifies three temperature-control zones in the hardening furnace and four in the tempering furnace. | Define process temperatures and operating requirements for the parts; check zone settings and establish production checks and records. |
| Temperature recordsWhat can be stored, retrieved and output | This project’s agreement specifies temperature-record storage, retrieval of temperature parameters by time period, and output of process execution data and charts. | Agree the recorded parameters, retention period, backup and output methods, and how temperature records will be linked to production batches. |
| Furnace atmosphere controlWhich sensing and control devices are included | This project’s agreement specifies an oxygen probe and carbon-potential controller for furnace atmosphere control, with automatic or manual operation. | Define atmosphere-control needs for the material and process. List any atmosphere data that must be stored or output and confirm each item with the supplier. |
| AlarmsWhich abnormal conditions are signalled | This project’s agreement specifies audible and visual high- and low-temperature alarms and a thermocouple-break alarm for the hardening furnace. | Define personnel responsibilities, batch review and disposition records for abnormal conditions. Confirm any alarm-history retrieval requirement separately. |
| Quench-tank monitoringTemperature, agitation and liquid level | This project’s agreement specifies continuous temperature measurement in the tank’s working area, quench-oil agitation, and low-level control and alarm functions. | Define the medium, temperature, liquid-level and agitation requirements for the process, along with routine checks. Confirm historical-record requirements separately. |
| Documentation and trainingWhat is delivered with the equipment | This project’s agreement specifies an equipment manual, electrical schematics and operating manuals for key instruments, plus technical training and operating demonstrations for the buyer’s operators and maintenance staff. | Arrange staff participation, retain equipment documents and establish site operating and maintenance instructions. List required calibration documents separately. |
State the measurement conditions with the acceptance criterion
This project’s technical agreement specifies three measurement points in the hardening furnace at 800°C, with a temperature deviation within ±5°C in the same temperature zone.
These are agreed equipment acceptance conditions, not measured site results. They do not establish that the temperature uniformity testing required for CQI-9 has been completed. Assessment-related instrument calibration, temperature-measurement system checks and temperature uniformity testing require separate confirmation of the test arrangements, responsible parties and report deliverables under the applicable edition and customer requirements.[2]
Put three items in the technical agreement before purchase
Configuration and scope
Identify what is included in the supply scope for your line, what requires an additional configuration, and what the buyer or a third party will provide. List controls, recording, alarms, the quench tank and documentation separately, rather than relying on a general statement of assessment support.
Record deliverables
Agree which parameters are recorded, how long records are kept, how they are retrieved and output, and how they relate to production batches. Ask the supplier to explain the functions and delivery method. A trend chart alone does not establish complete batch traceability.
Testing and documents
List equipment acceptance, calibration and testing arrangements separately, including who performs the work, who supplies reports and how the buyer receives them. Equipment manuals, quality-conformity documents and instrument calibration documents serve different purposes and are not interchangeable.
Questions before purchase
Does this page demonstrate that Suneng equipment alone can complete a CQI-9 assessment?
No. It describes the equipment configuration and delivery scope in one project’s technical agreement. The buyer still needs to implement applicable process management, production records, calibration and testing, and assess its actual operations.
Does every Suneng mesh-belt quench-and-temper line include these functions?
The table describes one project, not a universal standard configuration. For a new project, confirm each item against the parts, process, recording requirements and supply scope, and include it in the technical agreement.
Does an alarm function include export of all past alarms?
Alarm indication, historical storage and record output are separate functions. The cited project provisions specify alarms; they do not establish alarm-history retrieval, export or retention periods. Confirm these requirements separately before purchase.
Can an instrument manual be used as calibration evidence?
No. A manual explains instrument use and operation; calibration documentation records the relevant calibration work and results. Separately agree which documents are required, who issues them and whether they are included in the equipment delivery.
Share the customer’s assessment requirements with the part information
For a proposed mesh-belt quench-and-temper line, start with the part type, material, dimensions and target throughput, together with the CQI-9 edition and supplementary requirements specified by your customer. Include any required record formats, calibration documents or test lists so that equipment, recording functions and responsibilities can be discussed. If the information is incomplete, start with the requirements you already know.
Explore the equipment options
References
- [1] AIAG: Official overview of the CQI-9 Heat Treat System Assessment (opens in a new tab)
- [2] AIAG: Fourth-edition release announcement (opens in a new tab)
Apply the edition relevant to the buyer, customer requirements and actual production conditions.