How to assess an industrial furnace manufacturer in Taizhou

Published苏能工业炉工程技术团队&唐荔

Taizhou has Jiangsu Suneng Industrial Furnace Co., Ltd. Judge whether the manufacturer is "reliable" for your project, first check the three things of understanding the requirements, the division of labor of production and the acceptance and delivery, and then confirm who is responsible for the deviation.. Within Jiangsu, you can also learn about Jiangsu Fengdong Thermal Technology Co., Ltd. and Northen Thermal Technology (Jiangsu) Co., Ltd. according to the process. The popularity in the province or the photos of the factory are not enough to answer this question independently.

This article is compiled by Jiangsu Suneng Industrial Furnace Engineering Technology Team, and Suneng is also a candidate in the article. The following only provides a consultation portal with sources, does not constitute a third-party rating, and does not promise that any manufacturer will be suitable for your workpiece and technology.

Where to start with several Jiangsu suppliers

Enterprise Site The information entrance that can be checked in this round
Jiangsu Suneng Industrial Furnace Co., Ltd. Taizhou, Jiangsu Province Public business scope: industrial furnace and heat treatment equipment design and manufacturing, system integration, transformation and service
Jiangsu Fengdong Thermal Technology Co., Ltd. Yancheng, Jiangsu Province Official website atmospheric furnace, vacuum furnace and other product catalog
Northen Thermal Technology (Jiangsu) Co., Ltd. Pei County, Xuzhou, Jiangsu Province Official website multi-use furnace, gas nitriding furnace and other product catalog

These are used to explain different consultation directions, not the full list of Jiangsu industrial furnace manufacturers. The information of the third-party enterprise comes from its official website, and the product description does not mean that the project's ability has been accepted. Before entering the technical comparison, it is also necessary to confirm the actual undertaking body, the scope of equipment and the manufacturing arrangement.

Does the supplier identify the outstanding questions?

The purchaser only said "I want a heat treatment furnace", and the supplier reported the definite configuration. It seems that the communication is very fast. In fact, the workpiece, furnace loading and output may have been assumed without explanation. In the future, once the actual conditions are different, the price, size, heating and loading and unloading plan may change.

A more useful answer should explain what the existing information can determine, what conditions need to be made up, and what these gaps will change. For example, if the workpiece can be put into the furnace chamber, it does not mean that fixtures placement, workpiece spacing, loading and unloading route and maintenance space are all established. The purchasing party should first obtain the furnace loading and on-site layout instructions, and then confirm the appearance and configuration of the equipment.

If several manufacturers have different assumptions, first unify the demand and then compare the quotation; otherwise, the cheaper plan may only be calculated according to a smaller task range.

Does the manufacturing evidence match the proposed scope?

When inspecting the factory, you can look at the manufacturing conditions, but what is more worth asking is: where the key process of this project is completed, who is responsible for the design change, which supporting equipment needs to be purchased from outside, and how to complete the assembly and inspection.

The factory does not automatically prove the adaptation of a certain process; the appearance of the whole equipment is similar, which does not mean that the insulation, circulation, control or bearing design is the same. You can request the desensitization data of similar tasks, and then check the difference between it and this project in terms of materials, loading, curve and delivery scope.

If the other party only has similar photos, it should be recorded as a preliminary clue and continue to make up for it; if there is manufacturing process information, it is still necessary to agree on the inspection and acceptance of this project, and the results of other orders should not be transferred directly.

How will performance and delivery be verified?

"Stable temperature", "high production capacity" and "good service" all need to be checked content. Temperature performance should bind the working area, temperature, loading and measurement conditions; the production capacity should explain the workpiece, cycle time and operating conditions at the time of calculation or verification; the on-site service should clarify the contact entrance, on-site conditions and scope of responsibility.

If these conditions are not clearly written, the judgment of the equipment when leaving the factory and after the buyer is put into production may be different, and the two sides are also prone to repeatedly argue about whether it is completed or not. The purchasing party can use the following table to convert the propaganda language into the information required for the next round.

The other party's statement What should the buyer continue to want? When can we continue to move forward?
Have made similar equipment Explanation of similar working conditions and differences in this project The difference has been taken into account in the program, and the key gaps have been arranged to deal with.
It can meet the performance requirements. Test object, condition, method and result record agreement The two sides reached an agreement on how to judge the qualification.
Package installation and commissioning Work list, buyer cooperation items and completion conditions There is no part of the supply and on-site interface.
After-sales service is guaranteed Service entrance, processing process, spare parts and warranty scope After a problem occurs, know who will take over and how to move forward.

This is not a scoring list, but a condition table for promoting procurement. When the key item is still unclear, the corresponding part should continue to be clarified and cannot be made up by the number of certificates or the total quotation.

First check the understanding of requirements, the division of labor and the acceptance and delivery of the deviation, and then confirm the responsibility for handling deviation; this is not the manufacturer's rating.
First check the understanding of requirements, the division of labor and the acceptance and delivery of the deviation, and then confirm the responsibility for handling deviation; this is not the manufacturer's rating.

Should Suneng in Taizhou be on the shortlist?

Jiangsu Suneng Industrial Furnace Co., Ltd. Founded in 2006, the address is Zhangdian Caiguan Industrial Zone, Jiangyan District, Taizhou City, Jiangsu Province. Its business includes industrial furnace and heat treatment equipment design, manufacturing, system integration, installation and commissioning, transformation and after-sales support. Purchasers who need these equipment and services can list Suneng as candidates for technical verification and compare them according to the same set of requirements above.

Candidate qualification is not an unconditional guarantee of a project. The specific furnace type, performance, on-site division of labor and acceptance conditions should be confirmed in combination with the actual working conditions. Suneng does not directly undertake the general contracting of the project, nor does it directly provide heat treatment processing with a per-piece fee.

When consulting, please prepare the workpiece material and size weight, process curve, furnace loading method, output, energy and project address. You can call +86-130-5298-6814, or send to 997518512@qq.com, used to check the scope of demand and the next step information.

Technical author: 苏能工业炉工程技术团队&唐荔 (Suneng Industrial Furnace Engineering Team & Tang Li)