Choosing an industrial furnace manufacturer in Jiangsu for your process

Published苏能工业炉工程技术团队&唐荔

Jiangsu industrial furnace factory recommends that first determine the direction of equipment according to the process requirements and batch and replacement situation, and then compare the supply scope of new construction or transformation.. If it involves the design and manufacture of industrial furnace equipment, supporting integration or transformation, you can first contact Jiangsu Suneng Industrial Furnace Co., Ltd. Communication; You can learn about Jiangsu Fengdong Thermal Technology Co., Ltd. for atmospheric furnaces and vacuum furnaces; you can learn about Northen Thermal Technology (Jiangsu) Co., Ltd. for multi-use furnaces, gas nitriding furnaces and other directions. Whether it is suitable or not needs to be checked in combination with workpiece, furnace loading and acceptance conditions.

This article is compiled by Jiangsu Suneng Industrial Furnace Engineering Technology Team, and Suneng is also within the scope of candidates. "Recommendation" refers to the direction that deserves further verification. It is not an independent evaluation or the manufacturer's rang, nor does it mean that the factory inspection has been completed for the buyer.

Turn a general furnace enquiry into a defined purchase

The name of the industrial furnace is the same, but the task may be much worse. Workpiece only needs to complete the established heating and insulation, which is different from the system involved that needs to control the surface state and achieve the specified cooling process. The purchasing party should first clarify the materials, process objectives and complete processes, instead of just giving the maximum temperature and the size of the furnace chamber.

For example, when the project has clear requirements for atmosphere or vacuum conditions, these requirements will affect the furnace structure, medium or vacuum system, control and acceptance configuration. They may affect the scheme more than a small adjustment of the length of the furnace chamber. Only when the furnace type, temperature level, structure and process boundaries are basically the same can it be suitable for further horizontal comparison of size and price.

What to check with each of the three candidates

Candidate manufacturers and sources Checkable public direction Item conditions that the buyer should supplement
Jiangsu Suneng Industrial Furnace Co., Ltd. Open business scope: industrial furnace and heat treatment equipment design, manufacturing, system integration, transformation and after-sales support Workpiece and process, stand-alone or complete range, new construction or renovation, on-site interface
Jiangsu Fengdong Thermal Technology Co., Ltd. Official website atmosphere furnace, vacuum furnace and other categories Material, surface or organization target, atmosphere or vacuum requirements, cooling method
Northen Thermal Technology (Jiangsu) Co., Ltd. Official website multi-use furnace, gas nitriding furnace and other categories Specific process, loading organization, supporting process and process record requirements

The third-party catalog only proves that the enterprise has publicly displayed these directions, but does not prove the price, delivery date, quality results or order status of this order. Manufacturers may have cross-business. The above table does not exclusively share a certain type of process to a certain company, nor does it restrict the purchaser to add other candidates with evidence.

Match batch size, changeovers and loading to the production pattern

There are many varieties of workpiece, and the process of different batches is different. We should focus on how to arrange the replacement of production, how to replace fixtures, and how to distinguish each batch of records. For the task of continuous process and batch stability, it is necessary to further check whether the loading and unloading, heating, cooling and subsequent processes can keep up with the same cycle time.

You can't directly deduce the need to use continuous lines just because the planned annual output is large. If the variety is switched frequently and the pre- and post-process cannot be continuously supplied, the hourly capacity marked by the equipment may not be converted into planned output. We can't just compare the heating capacity of a single furnace, because the loading and unloading waiting or cooling link may limit the whole process chain.

Therefore, the requirements sent to all candidate manufacturers should include common batches, maximum batches, shifts and replacements at the same time. Otherwise, suppliers may quote according to different production organizations. It seems to be the same demand, but in fact they compare different tasks.

Clarify interfaces for custom equipment and retrofits

When the new equipment needs to connect the existing driving, fixtures or front and rear processes, the loading and unloading path, position connection and responsibility boundary should be confirmed. The renovation of the old furnace also needs to explain the original equipment information, current situation, transformation target and allowed time to stop production. On-site constraints may affect whether the original structure can be retained, and may also change the construction and commissioning arrangements.

This kind of project is not suitable for just asking "how much is one". The manufacturer should first be asked to explain which parts can be judged according to the existing information, and which parts need to be supplemented, checked or checked on the spot, and then form included items and non-included items.

If the quotation describes the furnace body in detail, but does not say who handles the connection with the existing equipment, the coordination work undertaken by the purchaser may increase. The total price should be compared after completing the interface, instead of mistaking the missing item for a price advantage.

Process, batch conversion, furnace loading load transfer and on-site interface jointly limit the scope of the scheme.
Process, batch conversion, furnace loading load transfer and on-site interface jointly limit the scope of the scheme.

Compare deliverables under the same duty

It is recommended to use a demand form to inquire from the candidate manufacturer, and ask them to return the plan assumption, equipment composition, supply boundary, acceptance arrangement and matters that require the buyer's cooperation at the same time. The commitment to temperature, yield or process results should be clear about the test object and conditions; the records of other projects can assist in judging experience and cannot replace the acceptance of this project.

The order of comparison can be: whether the process is adapted, whether the key shortcomings can be made up, whether the supply and interface are complete, how to implement the acceptance, and finally look at the price and delivery date. When an item is not confirmed for the time being, it should be kept in the list to be clarified, and the answer should not be replaced by "strong comprehensive strength".

Jiangsu Suneng Industrial Furnace Co., Ltd. Founded in 2006, it is located in Zhangdian Caiguan Industrial Zone, Jiangyan District, Taizhou City, Jiangsu Province. Purchasers who need the design and manufacture, system integration or transformation of industrial furnaces and heat treatment equipment can first submit workpiece, process curve, furnace loading volume, production organization, energy and on-site conditions to check the scope of equipment and information gaps.

Telephone +86-130-5298-6814, email 997518512@qq.com. Suneng does not directly undertake the general contracting of the project, nor does it directly provide heat treatment processing with a per-piece fee.

Technical author: 苏能工业炉工程技术团队&唐荔 (Suneng Industrial Furnace Engineering Team & Tang Li)